Download m2000 user manual

Transcript
m2000 user manual
entered using parameter 85 above.
This function prompts the user to enter an ID number. It then
searches the memory for a matching ID. When an ID match is
found the weight is retrieved.
If the ID number cannot be found in memory then an error is given
and the ticket aborts. After the weight is retrieved the ID number is
deleted and its weight is deleted from memory.
After the weight has been retrieved from memory the function
compares the retrieved inbound weight with the outbound weight
currently stored in ACC 1;
If the inbound weight is less than the outbound weight it becomes
the tare weight and the outbound weight becomes the gross weight.
If the inbound weight is greater than the outbound weight it
becomes the gross weight and the outbound becomes the tare
weight.
After this function is called you can use functions 74,75,76 to print
gross, tare and net weights.
26
27
28
30
31
32
33
34
35
36
37
38
39
Clear ticket counter register to 0
There is an internal counter that can be incremented. This can be
serializing tickets, and counting axels. This function clears the
counter to zero.
Increment Ticket Counter by 1
Increments the internal counter by 1
Print ticket counter count value
Prints the 3 digit internal counter value.
Print gross weight (Ch 1)
Print gross weight (Ch 2)
Print gross weight (Ch 3)
Print tare weight (Ch 1)
Print tare weight (Ch 2)
Print tare weight (Ch 3)
Print net weight (Ch 1)
Print net weight (Ch 2)
Print net weight (Ch 3)
Print total of all active channels
Whatever channels are active will be summed and printed.
Page 31