Download User Manual - For professionals
Transcript
Nucleus Freedom Speech Processor 3. Lift the straight back edge of the rubber plug, from the base of the battery holder. 4. Peel off the protective cover from the base of the battery holder. 5. Peel the new protective cover off its paper backing. Attach the sticky side of the protective cover to the base of the battery holder. Protective cover with sticky side facing up 6. Push the rubber plug f rmly back into place over the protective cover. 7. Replace the battery holder (with batteries), in the BTE Controller. Warning: Take care with the batteries and the protective cover. Small parts may be hazardous if swallowed or may cause choking if inhaled. 54 N31018F Iss2D02textmas.indd 54 8/06/2005 2:12:08 PM