Download User Manual - For professionals

Nucleus Freedom Speech Processor
Help messages
The following help messages may show on your speech
processor display:
Help
message
Meaning
H1
Flat battery
Action to tak
e
Change all the
batteries. *
Note: you will
stop hearing
sound, and only
be able to turn
off the speech
processor.
H2
H3
Low battery
Coil error
Repeating help
message
The help message will
show for about f ve
minutes or until the
speech processor is
turned off.
Be prepared to
change all the
batteries. *
The normal display
will continue until the
H1 message shows.
Push any button
to return to the
normal display.
If you don’t push
any button H2 will
continue until H1
message shows.
Check
• coil position
• cable
connections
• for cable
damage.
The help message
will return if the
coil connection is
restored, and then
lost again.
If H3 still shows,
replace the coil.
H4
Audio error
Follow the steps
in the Other
problems section,
to try to f x the
problem.
The help message
will return after f ve
seconds if there is still
no sound, and/or the
steps taken to try to
f x the problem have
not been successful.
* Refer to the Batteries section for further information.
56
N31018F Iss2D02textmas.indd 56
8/06/2005 2:12:12 PM