Download User Manual - For professionals

Transcript
Nucleus Freedom Speech Processor
3.
Lift the straight back edge of the
rubber plug, from the base of
the battery holder.
4.
Peel off the protective cover
from the base of the battery
holder.
5.
Peel the new protective cover
off its paper backing. Attach
the sticky side of the protective
cover to the base of the battery
holder.
Protective
cover with
sticky side
facing up
6.
Push the rubber plug f rmly back
into place over the protective
cover.
7.
Replace the battery holder (with batteries), in the BTE
Controller.
Warning:
Take care with the batteries and the protective cover.
Small parts may be hazardous if swallowed or may
cause choking if inhaled.
54
N31018F Iss2D02textmas.indd 54
8/06/2005 2:12:08 PM