Download G3/G4 Facsimile Error Code List

Chapter 2: Service Error Codes
##200
[ RX ] During image reception, a carrier is not
detected for 5 sec
Cause
Remedy
• The line condition is poor, and the image
signal cannot be received.
• Ask the operator of the other party to increase the transmission level*1 so that the
image signal may be received correctly.
• Ask the operator of the other party to decrease the transmission start speed.
• The training signal cannot be received because of an echo of CFR, causing a timeover condition.
• Provide echo remedy 3*7.
• Decrease the transmission level*1 so that
an echo of transmitted CFR will not be received.
##201
[ TX/RX ] DCN was received through a non-normal
procedure
Cause
Remedy
• The other party is not ready for reception
(e.g., out of recording paper).
• Ask the operator of the other party to set
the machine for reception (as by setting recording paper).
• The user telephone number has not been
registered (if the receiving machine is a
RICOH 3000L).
• Register the user telephone number.
• During reception, a talk reservation was
made; however, a call was not answered.
• Contact the other party by telephone.
2-24