Download LOCKWELT 3000

Lockwelt 3000
ADJUSTMENTS
Top Thread Cutter
After sewing, the top threads are held by the top thread catcher as the clamp moves to the tab knife cutting
position.
The threads are first clamped on the top side of the catcher and cut on the backside.
The thread clamp must hold the threads during the first stitches of the seam start to ensure good quality
sewing at the seam start.
Top Thread Catcher Height
A distance of 3 to 4 mm, must be maintained between the sliding plate and the thread catcher, when the
thread catcher cylinder is fully extended.
If incorrect:
Loosen the cylinder locking screws and position the cylinder to the proper height.
Tighten the screws.
Caution! Ensure the center knife does not contact the thread catcher.
Released March 2001
U.S. Phone 800-237-3323
Outside U.S. Phone 1-804-559-5000 Fax 1-804-559-5210
1-79