1
Download FOUNDATION
Transcript
Block Library Idx Parameter Data Type Valid Range/ (length) Options Default Value Units Store / Mode Description 25 CT_VAL_D2 Unsigned8 0 S Integer constant value 2. 26 OUT_HI_LIM Float 100 OUT S High limit for OUT. 27 OUT_LO_LIM Float 0 OUT S Low limit for OUT. D The block alarm is used for all configuration, hardware, connection failure or system problems in the block. The cause of the alert is entered in the subcode field. The first alert to become active will set the Active status in the Status attribute. As soon as the Unreported status is cleared by the alert reporting task, another block alert may be reported without clearing the Active status, if the subcode has changed. 28 BLOCK_ALM DS-72 Na Legend: E – Enumerated parameter; na – Admensional parameter; RO – Read only; D – dynamic; N – non-volatile; S - static Gray Background Line: Custom Parameters 2.133
