1
Download 3152 Guide.book
Transcript
Using The Scan Tool Display Test The Display Test is used to check the display. ✓ The test fills every pixel of the display with a solid black character. From System Setup menu: 1.Select Display Test. •Use UP or DOWN arrow key until Display Test is highlighted. System Setup ===================== Print Header Language Setup Long PID Names Tool Information Display Test Keypad Test 3 2. Start Display Test. ENTER. •Press 3. Look for Missing Spots. • All characters display are solid black if there are no bad spots. • Screen flips back and forth between screens shown below. Display Test ===================== Check for Missing Spots in Display Press BACK 4. When Done, Press to Exit BACK Key. 3 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
