Download Owner`s Guide

Appendix B: Input Connection Compatibility
Component-1 and Component-2 Inputs
These inputs are compatible with component video signals from standard DVD players and other equipment sending
a standard NTSC component video signal (480i). These inputs are also compatible with newer DVD players sending
480p and are compatible with signals from digital TV receivers that send 720p and/or 1080i component video signals.
PC Input
This input will accommodate most computers capable
of supporting a VGA monitor. The refresh frequency (or
vertical sync) is 60 Hz. Compatible display resolutions
are:
VGA
SVGA
XGA
SXGA
640 x 480
800 x 600
1024 x 768
1280 x 1024
PC720p 1280 x 720
WXGA
1365 x 768
PC1080p 1920 x 1080
INP-DTV
This input is compatible with most standard DTV and
satellite receivers with component video (YPbPr) outputs.
Compatible DTV signals are SDTV 480i/480p, and HDTV
720p/1080i. Please check the DTV receiver specifications
before connecting.
This input is compatible with some DTV receivers using
RGB with “separate H and V sync”. Compatible DTV
signals are SDTV 480i, 480p, and HDTV 720p/1080i.
Industry standards for DTV RGB signals (systems,
synchronization, timing, and signal strengths) are not
currently established. These inputs will not be compatible
with all DTV receivers that offer RGB, HV outputs. RGB
signals with less than 5 cables are not compatible.
If your DTV receiver offers both DTV component video
signals and DTV RGB, HV signals, we suggest you use the
DTV component video signals. Check the DTV receiver
specifications before connecting.
Input Levels and Timing with
Component Video
EIA - 770.1 and EIA - 770.2 Standard Levels &
Timing
Y
= 1.0Vp-p (includes sync) 75-Ohms
Pr = 700mVp-p, 75-Ohms (can also receive
signals from outputs labeled R-Y and Cr)
Pb = 700mVp-p, 75-Ohms (can also receive
signals from outputs labeled B-Y and Cb)
Input Levels and Timing When Used
With HD Component Video Signals
EIA - 770.3 Standard Levels and Timing
Y = 1.0Vp-p (includes sync) 75-Ohms
Pr = 700mVp-p, 75-Ohms
Pb = 700mVp-p, 75-Ohms
H = Not Used
V = Not Used
Input Levels and Timing When Used
With RGB, HV Video Signals
G = 700mVp-p (no sync), 1Vp-p (with sync)
75-Ohms
R = 700mVp-p, 75-Ohms
B = 700mVp-p, 75-Ohms
H = 4Vp-p+/-1.0v, 2.2k-Ohms
V = 4Vp-p+/-1.0v, 2.2k-Ohms
NetCommand® IEEE 1394 & HAVi System Compatibility
This television is designed to conform to IEEE 1394 AV/C and HAVi Software standards in effect at the time of
development. This exciting new networking and control technology is designed to provide high-performance digital
connections and product control, making products easier to use.
At the time of development,the only products available for compatibility testing - the Mitsubishi and JVC DVHS VCRs.
These D-VHS VCRs are fully compatible with this TV.
As other manufacturers produce products that use IEEE 1394 AV/C and HAVi, they will be responsible for the
development of their products to meet the standards of the technology, as well as compatibility testing with other
products. Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these
other products. Any compatibility problems with other manufacturers products should be brought to the attention of
those manufacturers.
73