Download Electra Elite 48 System Hardware Manual

Electra Elite
Issue 7
Equipment Name
CT(A)-R Unit
Description
TAPI (Microsoft Telephony Application Programming Interface)
adapter allows a Multiline Terminal to be connected to a PC. The
terminal must be within 5 feet (1.5m) of the PC. When the length of
24AWG twisted 1-pair cable exceeds 200 feet, an AC(A)-R adapter
is necessary.
KSU Maximum
Quantities
32
This adapter can be installed on any DTH/DTR Multiline Terminal
except DTR-2DT-1 TEL.
CTA-U Unit
TAPI (Microsoft Telephony Application Programming Interface)
adapter allows an Electra Elite Multiline Terminal to be connected to
a PC.
32
This adapter can be installed on any DTP or DTU Multiline Terminal
except DTP-2DT-1 TEL, DTP-16HC-1 TEL, or Cordless terminals.
This unit is a CTA adapter for Universal Serial Bus with ESI(8)-U( )
ETU connection.
CTU(S)-U Unit
32
This adapter can be installed on any DTP or DTU Multiline Terminal
except DTP-2DT-1 TEL, DTP-16HC-1 TEL, or Cordless terminals.
DBM(B)-U( ) Box
This Message Display Board is connected to the ESI(8)-U( ) ETU to
provide a message waiting light for voice mail boxes. Each
Message Display Board supports eight message waiting lights.
8
DBM(E)-U( ) Box
Expansion for Message Display Board. Up to five DBM(E)-U( )s
can be connected to one DBM(B)-U( ).
40
HFU-U Unit
This optional Handsfree Unit provides full-duplex handsfree
communication. This unit comes with the handsfree adapter and an
external microphone.
32
This adapter can be installed on any DTP or DTU Multiline Terminal
except DTP-2DT-1 TEL, DTP-16HC-1 TEL, or Cordless terminals.
NEC PC Telephony Board (TAPI) without a modem.
PCT(S)-U( ) Unit
RAK-U10 Unit
SLT(1)-U( ) ADP
This unit can be installed on the ISA bus on any IBM-compatible
PC, and it can be connected directly to the ESI port.
This 19” unit is used to simplify installation by rack mounting the
Electra Elite 48 system.
This Adapter provides an interface for Single Line Telephones and
other similar devices from an ESI ETU port.
32
1
8
This adapter can be connected to any ESI port.
WM-R Unit
This Wall Mount Unit is used to mount any DTH/DTR Multiline
Terminal except DTR-2DT-1 TEL to the wall and connects to the
back of the Multiline Terminal.
32
This unit is required when an AD(A)-R, AP(A)-R, AP(R)-R or
CT(A)-R Unit is installed.
System Hardware Manual
1 - 19