Download CUT-SHEET LAMINATOR 1600-D

1600-D
Morton Electronic Materials
REPLACEMENT OF THE COUNTER-BLADES
If the counter-blades are rotated on their own axes or tipped up, all four cutting edges of the utensil can be
used.
In order to rotate, tip up, or replace the counter-blade, it is sufficient to proceed as for the “Replacement
of the tacking bars”, from point 1 to 3 and from point 7 to 8.
These parts should also only be replaced by specially trained personnel, using materials which conform,
both from the point of view of design and characteristics, to the originals.
III-8