1
Download R&S SMF100A Operating Manual
Transcript
R&S®SMF100A Remote Control Commands SOURce Subsystem Manual control: See "Polarity – External Inputs" on page 227 [:SOURce<hw>]:DM:FSK:DEViation <Deviation> The command sets the frequency deviation for FSK modulation. Parameters: <Deviation> float Range: 0.0 Hz to 50.0 MHz Increment: 0.1 Hz *RST: 10 MHz Example: SOUR:DM:FSK:DEV 20 MHz sets the deviation to 20 MHz. Options: R&S SMF-B20 Manual control: See "Deviation – FSK" on page 237 [:SOURce<hw>]:DM:FSK:SOURce <Source> The command selects the source for the FSK modulation signal. Parameters: <Source> EXT1 | EXT2 | PGENerator | RANDom EXT 1/EXT 2 Selects the external inputs (either EXT1 or EXT2) as the source for FSK modulation. PGEN Selects the internal pulse generator as source for FSK modulation. RAND Selects random pulses generated by the noise generator as the source for FSK modulation. *RST: EXT1 Example: SOUR:DM:FSK:SOUR EXT1 selects the external input EXT1 as source for the frequency modulation signal. Options: R&S SMF-B20 Manual control: See "Source – FSK" on page 237 [:SOURce<hw>]:DM:FSK:STATe <State> The command activates/deactivates the FSK modulation. Parameters: <State> 0 | 1 | OFF | ON *RST: Operating Manual 1167.2319.32 ─ 08 OFF 428
