Download Hard Disk Logger SERVICE MANUAL

4. SETUP PROCEDURES
4.
SETUP PROCEDURES
4.1 Entering the System Setup menu
(1)
Press the [SYSTEM] key until the “Customize Settings System(3/4)” MENU shown below appears.
CURSOR
(2)
Move the cursor to the “Execute Setting(s)” position as shown above.
(3)
Press the [ENTER] key to display the "No change." message shown below.
(4)
Press the [SHIFT] key.
(5)
Press the [ENTER] key to display the menu below from which you can execute the various Setup
operations.
SYSTEM Page
5
6
7
8
GL1000-UM-251-9370
Item
Setup
Modify LPF freq
Setup MAC Address
Key Test
Description
Setup of amp
Change of filter setting
MAC Address setting
Key test
4-1
Remark
AMP
Not for std. model
Do not change this setting
Monitor