Download FP500-ADA Installation Guide

Input specifications of base unit
Model
No. of inputs
Input common
KV-10xx KV-16xx KV-24xx KV-40xx
6
24
10
16
COM is connected internally.
Maximum input
rating
Input voltage * 1
24 VDC, 5.3 mA/5 VDC, 1.0 mA
Output specifications of basic unit
Model
No. of outputs
Output common
Output type
26.4 VDC
Rated load
10 ms (Typical)
10 µs when HSP instruction is used
Variable in 7 steps from 10 µs to
Input time constant
10 ms while special utility relay 2813
is ON (Set by DM1940)
Interrupt input
response
High-speed counter
input response
KV-10xT(P) KV-16xT(P) KV-24xT(P) KV-40xT(P) KV-10xR KV-16xR KV-24xR KV-40xR
4
6
8
16
4
6
8
16
1 common
Each common terminal is independent.
Transistor output (NPN or PNP)
Relay output
30 VDC
250 VAC/30 VDC
0.3 A (503 and other)
2 A (Inductive load)
0.1 A (500 to 502)
4 A (Resistive load)
0.2 A (500 to 502)
1 A (Other)
Peak load current
5A
Electrical service life:
100,000 times or more (20 times/min)
Mechanical service life:
20-million times or more
Relay service life
10 µs (Typical)
Relay replacement
Output frequency
30 kHz (24V±10%)
Built-in serial
resistance
*1. Inputs 000 to 007 can be changed to 5 V input.
Not allowed
50 kHz (500 to 502)
1.6 kΩ 1/2W (R500 to R502)
Input/output specifications of expansion unit
Input/output
External
connection method
Model
Number of inputs
Input common
Maximum input
rating
Input voltage
Minimum ON voltage
Input
KV-E8X
KV-E16X
8
16
4 points/common
(Changed in two steps by
special utility relays 2609
to 2612)
KV-E8T(P)
KV-E16T(P)
KV-E16R
KV-E4XT(P)/R
4
4 points/common
26.4 VDC
26.4 VDC
24 VDC, 5.3 mA
19 V
2 mA
2 mA
4.3 kΩ
4.3 kΩ
For both rising (OFF ON) and
falling (ON OFF) operations,
10 ms: 10 ms±20%, 10 µs: 10 µs±20%
For both rising (OFF ON) and
falling (ON OFF) operations,
10 ms: 10 ms±20%, 10 µs: 10 µs±20%
Number of outputs
Output type
Output common
8
16
NPN (PNP) Transistor
COM is connected internally.
Rated load
voltage
8
30 VDC
Rated output
current
ON resistance
Leakage current
at OFF
Falling operation time
(ON OFF)
16
Relay
4 points/common
4
NPN (PNP) Transistor/Relay
4 points/common
250 VAC/30 VDC,
2 A (Inductive load),
4 A (Resistive load)
30 VDC/, 250 VAC/30 VDC,
2 A (Inductive load),
4 A (Resistive load)
2 A/point (Inductive load),
0.5 A/point/, 2 A/point (Inductive load),
4 A/point (Resistive load), 4 A/common
4 A (Resistive load), 4 A/common
50 mΩ or less
/ 50 mΩ or less
0.5 (0.3) A/point
Residual voltage
at ON
Rising operation time
(OFF ON)
100 µA max.
100 µA max./
0.8 V max.
0.8 V max./
50 µs max.
10 ms max.
50 µs max./10 ms max.
250 µs max.
10 ms max.
250 µs max./10 ms max.
Electrical: 100,000 times or more
(20 times/min),
Mechanical: 20-million times or more
Relay service life
Relay replacement
Weight
KV-E8R
24 VDC, 5.3 mA
19 V
Maximum OFF
current
Input impedance
Input time constant
Input/output
Output
Terminal block
Approx. 100 g
Approx. 130 g
Approx. 100 g
Approx. 130 g
Electrical: 100,000 times or more
(20 times/min),
Mechanical: 20-million times or more
Not allowed
Approx. 130 g
Approx. 190 g
/Not allowed
Approx. 100 g/Approx. 120 g
Input/output circuit of expansion unit
Output (PNP Transistor)
Insulated
power supply
Internal
circuit
Y0
C
Insulated
power supply
Output (Relay)
C
Y0
Internal circuit
510 Ω
C
Internal circuit
4.3 kΩ
X0
Photocoupler
insulation
Internal circuit
Output (NPN Transistor)
Input
Y0
C