Download Vista FX - Operating Instructions

Transcript
Vista FX
1
Introduction
Software V4.9 allows to have highest quality multi-effect units deeply integrated into the Vista mixing system.
Multi-effect units are useful for any mixing application, but most importantly
for sound reinforcement and live broadcast productions. In general, multieffect units provide effects processing for the most commonly used time
based effects, such as : Reverb, Flange/Chorus and Delay. Studer Vista FX
is the result of a collaboration between Studer and Lexicon, which provides
broadcast quality effects-processing, controlled from the intuitive Vistonics
interface of the Vista console.
The processing is carried out in Vista FX DSP units which are linked to the
SCoreLive. These hardware units are based on the legendary Lexicon PCM96
Surround DSP-platform, and therefore provide all PCM96 Surround effect
preset categories :
•
•
•
•
•
•
•
•
•
•
•
Hall & Random Hall
Concert Hall
Plate
Chamber
Room
Dual Delay
Random Delay
Chorus / Flange
Resonant Chords
Reverse
Pitch Shift
Vista with SCoreLive The Vista FX units are optional hardware units which can either be part of
a newly ordered mixing system, or they can be added to any exisiting Vista
mixing system which is based on the SCoreLive DSP engine.
Vista with Performa Core Vista mixing system based on the older Performa DSP engine cannot be
equipped with Vista FX.
Vista with Infinity Core Vista mixing systems based on the Infinity Core can make use of the original
Lexicon PCM 96 Surround units to achive the Vista FX functionality. Two
Lexicon PCM 96 Surround units have the same FX resources as one Vista
FX unit.
Document generated: 28.08.14
SW V4.9
Vista FX  1-3