Download Vista FX - Operating Instructions

Transcript
Vista FX
5
Operation
5.1
Engine setup
As oposed to the initial setup process, which is described above - here, the
actual operation with Vista FX is explained.
As the starting point for working on a session by session basis with Vista FX,
the engine setup needs to be carried out.
By pressing the FX button, the Vista FX Engine Setup window opens up.
The Vista FX Engine Setup window has three tabs : FX1, FX2, FX3
Each tab is representing one Vista FX hardware unit.
Every unit has two engines : Engine A and Engine B, each engine being
one PCM96 Surround processing board.
Clicking on the pull-down menu, the choice of engine setups is presented,
and one can be chosen to be applied into the desired engine.
Document generated: 28.08.14
SW V4.9
Vista FX  1-13