Download Chapter B CONTRACT DOCUMENTS

DOME CAMERAS – Item No.
Special Provision No. 684S10
1.
September 2007
SCOPE
This Special Provision covers the requirements for installation and testing of dome cameras consisting of an
image sensor, zoom lens, pan and tilt functions, weatherproof outdoor dome assembly, mounting hardware,
and camera, power, and ground wiring, at the locations shown in the Contract Drawings. The above listed
items shall be installed to form a complete and fully operational camera assembly to be pole mounted.
The Contractor shall supply software for local camera control and configuration.
2.
REFERENCES
This Special Provision refers to the following standards, specifications or publications:
Canadian Standards Association:
CAN/CSA C22.2 NO. 60950-00
Safety of Information Technology Equipment (Bi-national standard,
with UL 60950) Canada National Standard/Canadian Standards
Electronic Industries Alliance / Telecommunications Industry Association:
EIA/TIA (RS) 170
Electrical Performance Standards - Monochrome Television Studio Facilities (NTSC
Standard)
National Transportation Communications for ITS Protocol (NTCIP):
NTCIP 1205: 2001
NTCIP Objects for CCTV Camera Control
National Electrical Manufacturers Association (NEMA):
NEMA 250
Enclosures for Electrical Equipment (1000 Volts Maximum) – NEMA 4 Type
Others:
Canadian Electrical Code (CEC)
Ontario Electrical Safety Code
3.
DEFINITIONS
For the purpose of this Special Provision, the following definitions apply:
IP: means Internet Protocol.
Management System: means a computer system used to control an NTCIP component. This includes any
NTCIP compliant local control software used for field control as well as the central control software.
September 2007
Pg. 1 of 9
SSP684S10