Download Chapter B CONTRACT DOCUMENTS

BOLLARDS - Item No.
Special Provision No. 599S27
1.
September 2007
SCOPE
This Special Provision covers the requirements for the installation of bollards.
2.
REFERENCES
This Special Provision refers to the following standards, specifications or publications:
Ontario Provincial Standard Specifications, Construction:
OPSS 603
Installation of Ducts
Ontario Provincial Standard Specifications, Material:
OPSS 1350
Concrete – Materials and Production
3.
DEFINITIONS – Not Used
4.
DESIGN AND SUBMISSION REQUIREMENTS – Not Used
5.
MATERIALS
5.1
Pipe
Galvanized steel pipe shall meet the requirements of OPSS 603 for steel conduit.
5.2
Concrete
Concrete shall meet the requirements of OPSS 1350, 30 MPa class.
5.3
Reflective Tape
Reflective tape shall be non-metallic 6-inch Engineering Grade (Type I) Safety Reflective Tape in yellow
colour.
6.
EQUIPMENT – Not Used
7.
CONSTRUCTION
Bollards shall be installed plumb and at the same height as indicated in the Contract Drawings and marked
with a reflective tape following the placement. Three tape stripes shall be placed starting at the top with
100mm separation between each stripe.
7.1
September 2007
Quality Control
Pg. 1 of 2
SSP599S27