Download PRODUCT SPECIFICATIONS

No.
4063201000900
(6) Test status display
Test status is displayed as follows.
• Operating status of linked chambers
• Test status of all groups
• Measured value and operating status for all channels
(7) Contact check
This feature checks whether specimens are open or not
and whether or not they are connected prior to starting the
test. The check is performed 1 time for a selected group
and the measured value is displayed on the main monitor.
However, this data can not be saved in the file.
Measurement voltage and charging time are the only
conditions that can be set for this feature.
This feature monitors the applied voltage for specimens.
When the applied voltage fluctuates ±10％ of a setting
(8) Applied voltage monitor
value, the test of the applicable channels is terminated.
10.2 Data processing features
(1) Measurement data processing and management
① Primary data display
② Primary data graph projection
③ User-selected data record deletion
④ Data file conversion to text format (CSV file)
⑤ Record jump
⑥ Primary data file merging
* Primary data means measured data.
(2) Results output
The following items can be displayed. (Printing is possible with the optional printer.)
① Measured data and edited data
② Test conditions
③ Graph plots
Plots the change in insulation resistance against time.
• Change-over-time graph (X-axis: Time)
(Temperature and humidity data can be displayed at the same time.)
Graph projections have the following features.
• User-selected channel display
Plots maximum-average-minimum and average ±nσon graph.
• Resistance can be displayed as absolute value or rate of change.
• Time and resistance axes can be selected between linear and logarithmic
scales.
• Can paste graph window to clipboard.
• Can display data for a specific point by clicking on graph.
• Can project multiple data on same graph.
13
ESPEC CORP.