Download K246 Instructions

FORM #9600.01-082109
PRINTED IN U.S.A.
PAGE 2 OF 12
PARTS LIST … The part number is stamped into each part or printed on an adhesive label.
Identify each part and place the appropriate mounting hardware with it.
PART NO.
DESCRIPTION
NEW ATTACHING
HARDWARE
(Qty.- if more than one)
(Qty.- if more than one)
BAG #
66-01-9600 .................. knuckle, driver side ...................... (2) 1/8” x 2” cotter pin…………77-0031
66-02-9600 ................. knuckle, passenger side ............... (2) 1/8” x 2” cotter pin..............77-0031
55-03-9600 .................. (4) crossmember drop bracket ..... (4) 5/8” x 5-1/2” bolt…………...77-0033
(4) 5/8” Nyloc nut
(12) 7/16” x 1-1/4” bolt
(12) 7/16” Nyloc nut
55-04-9600 .................. crossmember, front
55-05-9600 .................. crossmember, rear
55-06-9600 .................. centerlink. ..................................... (4) 1/8” x 2” cotter pin…………77-0031
55-07-9600 .................. CSS link ....................................... (2) 9/16” x 3” bolt………………77-0034
(2) 9/16” Nyloc nut
(2) 9/16” USS flat washer
(4) 01-2210 bushing half
(2) 3/4” OD x 1-3/4” long sleeve
55-08-9600 .................. (2) kicker brace ............................ (2) 7/16” x 3-1/2” bolt………….77-0035
(2) 7/16” Nyloc nut
(2) 1/2” x 1-1/4” bolt
(2) 1/2” Nyloc nut
(4) 01-595 bushing half
(2) 5/8” OD x 2-1/4” long sleeve
55-09-9600 .................. differential bracket, pass. side ...... (1) 12mm x 100mm bolt………77-0036
(1) 12mm Stover nut
55-10-9600 .................. differential brace, pass. side ........ (1) 5/8” x 1-1/2” bolt……………77-0036
(1) 5/8” Nyloc nut
(2) 5/8” USS flat washer
55-11-9600 .................. torsion bar drop, driver side ......... (1) 7/16” x 2-1/2” bolt…………..77-0036
(3) 7/16” x 1-1/2” bolt
(4) 7/16” Nyloc nut
(8) 7/16” thick washer
(1) 5/8” OD x 1-1/4” long sleeve