Download Micro-Tech 3106 Impact Flowmeter Integrator Operations & Service

Micro-Tech 3106
A damping factor can also be selected for each current channel. This damping
only affects the current output, not the displayed flow rate, which has a separate
damping factor, selectable in Main Menu 2, Display.
Scroll DOWN and the I/O DEF SCROLL 1C screen displays.
- I/O DEF SCROLL 1C Current out damping
Password: Operator
#1: 2 sec
ENTER NEXT
Default:
Min:
2 sec
0 sec
Max:
400 sec
2. Define Analog Inputs
If the 2-inputs/2 outputs analog board is installed, the following screens are
displayed. Analog inputs can be used for measuring the moisture of the material.
Moisture compensation is performed on the process material flow, and affects
both rate and totals. Only during material calibration with material is moisture
compensation suspended, so that the totalized quantity can be directly compared
to the weight obtained on a static scale. The moisture compensation is executed
before adding to totals. Press the CHOICE soft key to scroll selections. Press
ENTER to confirm your selection.
Scroll DOWN and the I/O DEF SCROLL 2 screen displays.
- I/O DEF SCROLL 2 Analog input #1 def.
Password: Service
#1: > Off <
CHOICE
ENTER CALIB
Default:
Selections:
OFF
OFF, MOISTURE
Scroll DOWN and the I/O DEF SCROLL 3 screen displays.
- I/O DEF SCROLL 3 Analog input #2 def.
Password: Service
#2: > Off <
CHOICE
ENTER CALIB
Default:
Selections:
REC 4187
OFF
OFF, MOISTURE
B-27