Download P69xx Series High-Density Logic Analyzer

Operating Basics
P6980 High-Density
Differential Probe
The P6980 Probe is a 34-channel, high-density connectorless differential probe
with D-Max probing technology (see Figure 3). The probe consists of two
independent probe heads of 17 channels each (16 data and 1 clock/qual).
Figure 3: P6980 High-Density Differential probe with D-Max probing technology
The following list details the capabilities and qualities of the P6980 Probe:
H
Differential data, clock and qualification inputs (single-ended signals may be
probed if negative input is grounded)
H
cLGA contact eliminates need for built-in connector
H
Footprint supports direct signal pass-through
H
Supports PCB thickness of 1.27 mm to 6.35 mm (0.050 in to 0.250 in)
H
Consists of two probe heads supporting 17 channels each, for a total of 34
channels
H
2X mode (1:2 demultiplexing) and 4X mode (1:4 demultiplexing), use one
probe head to minimize required board real estate
H
Color-coded keyed attachment
H
--2.5 V to +5 V input operating range
H
--2.0 V to +4.5 V threshold range
H
300 mV minimum single-ended signal amplitude (5 V maximum)
H
150 mV each side minimum differential signal amplitude (2.5 V maximum)
P69xx Series High-Density Logic Analyzer Probes Instruction Manual
5