Download Power Meter

R&S NRP
Command
Remote Control - Commands
Preset and *RST value
DISP[1..4]:TRAC:UPP
30 DBM
DISP[1..4]:TSL
DISP[1..4]:UPD
FORM
FORM:BORD
1
NORM
ASC
NORM
MEM:...
-
OUTP:REC1:FEED
"CALC1"
OUTP:REC2:FEED
"CALC2"
OUTP:REC1:STAT
OUTP:REC2:STAT
OUTP:ROSC
OUTP:TTL:ACT
-20 DBM or
0 DB
20 DBM or
10 DB
ON
OFF
OFF
LOW
OUTP:TTL:FAIL
HIGH
OUTP:TTL:FEED
"CALC1:LIM"
OUTP:REC[1..2]:LIM:LOW
OUTP:REC[1..2]:LIM:UPP
OUTP:TTL:HVOLT
OUTP:TTL:LVOLT
SENS[1..4]:AVER
SENS[1..4]:AVER:COUN
SENS[1..4]:AVER:COUN:AUTO
SENS[1..4]:AVER:COUN:AUTO:MTIMe
SENS[1..4]:AVER:COUN:AUTO:RES
SENS[1..4]:AVER:COUN:AUTO:SLOT
SENS[1..4]:AVER:COUN:AUTO:NSR
SENS[1..4]:AVER:COUN:AUTO:TYPE
SENS[1..4]:AVER:TCON
SENS[1..4]:CORR:DCYC
SENS[1..4]:CORR:DCYC:STAT
SENS[1..4]:CORR:FDOT
SENS[1..4]:CORR:FDOT:STAT
SENS[1..4]:CORR:OFFS
SENS[1..4]:CORR:OFFS:STAT
SENS[1..4]:FREQ
SENS[1..4]:FUNC
1144.1400.12
3.3 V
0.0 V
ON | OFF
<NR1>
OFF
<NRf>
<NRf>
<NR1>
<NRf>
RES | NSR
MOV
REP
<NRf>
ON |OFF
OFF
<NRf>
ON | OFF
"POW:AVG"|
"POW:BURS:AVG"|
"POW:TSL:AVG"|
"XTIM:POW"
6.99
Remark
Upper limit of power axis in Scope
mode
First timeslot
Frequent display updates.
Measured data in ASCII format.
"Big-Endian" byte sequence of
measured data, if FORM REAL.
The settings in the MEMory command
system will not be affected.
Analog outputs are fed by the first
calculate block.
Analog outputs are fed by the second
calculate block.
0 V equivalent at analog output.
3 V equivalent at analog output.
Analog output active.
Trigger input active.
Test generator is switched off.
OUTP:TTL:LVOLT is applied to the
TTL output if a limit is violated.
OUTP:TTL:HVOLT is applied to the
TTL output if a limit is violated.
The TTL output is fed by the limit
monitoring function of calculate block
1.
High voltage at TTL output
Low voltage at TTL output
Depending on sensor.
Depending on sensor.
Depending on sensor.
Depending on sensor.
Depending on sensor.
Depending on sensor.
Depending on sensor.
Depending on sensor.
(PRES) and SYST:PRES.
*RST.
Depending on sensor.
Depending on sensor.
No change.
Depending on sensor.
Depending on sensor.
No change.
Depending on sensor.
E-3