Download v600 front fork scale user manual - Vulcan On

CHAPTER 7
29
Press the PWR / MENU button to turn on the meter.
After the meter has completed its startup routine and is running, press the PWR / MENU
button to enter the program menu.
Press the CYCLE button twice until SETUP / CALIBRATE is displayed.
O
P
E
R
A
T
I
O
N
M
O
D
E
Press the ENTER button to select the SETUP / CALIBRATE menu option.
Press the CYCLE button until SET: UNITS is displayed.
Press the ENTER button to select the SET: UNITS option.
Press either the S or T buttons to switch between lb and kg.
Press the ENTER button to store the units selected and return to the SET: UNITS menu
option.
Press the PWR / MENU button twice to exit and the meter will return to the normal
operation mode. The scale system is now ready to weigh.
March 2008
VULCAN ON-BOARD SCALES 1-800-237-0022
© STRESS-TEK, INC. 2008
Doc. 44-10115-001 Rev. -