Download DG535

QUICK START INSTRUCTIONS
(1) Make certain that the correct line voltage is selected on the rear panel.
(2) Press the power button "in" to turn on the unit.
(3) Press the RECALL Menu key, the "0" digit, and the EXC key in sequence to
recall default settings.
(4) Press the left cursor key (<) twice to select internal trigger.
(5) Trigger the oscilloscope on the rising edge of T0's output, and display A's
output on the 1µs/div scale.
(6) Press the DELAY Menu key and use the cursor keys to change the A delay
from 0.0 seconds.
(7) If you ever change the OUTPUT Menu, be sure to specify the correct
load impedance.
(8) If you have problems, read the detailed descriptions and troubleshooting
sections that follow.
vi