Download VeCtor Control Desk

Netgear Prosafe - GS108
Netgear GS108
The functions of the components and connectors on the Netgear GS108 8 Port switch are:
(1) Power LED - This LED indicates when the Ethernet switch is powered on.
(2) Port Status LEDs - These LEDs indicate the status of each RJ-45 connector. When the left
LED is green , a link with a communication rate of 100M is established between the port and a
computer or second switch. If the right LED is lit a 10M link is established. Both LEDs light to
indicate a 1000M link. Flashing LED to indicate activity is occurring through the port.
(3) RJ-45 Connector - Connection (port) for the Cat5 ethernet cables attached to each scorer
computers and/or ethernet Switch located at the control desk. Each port is capable of auto
sensing for 10Mbps, 100Mbps or 1000Mbps operation.
(4) Power Connector - Input for power coming from the A/C power adaptor. Only use the power
adapter that is supplied with the switch.
26 Vector / Vector Plus Control Desk