Download Oracle Database Appliance Service Manual

Servicing Oracle Database Appliance (Original Version) FRUs
2
Disconnect the fan power cables and remove them from the server node.
▼ Install Fan Power Cables
1
Reconnect the fan power cables.
2
Return the server node to operation.
a. Install the server node top cover.
See “Installing the Server Node Top Cover” on page 133.
b. Install the server node into the system.
See “Installing a Server Node Into the System Chassis” on page 134.
c. Power on the server node.
See “Powering On Oracle Database Appliance (Original Version)” on page 136.
Servicing the PCIe Card Cables (FRU)
The Oracle Database Appliance (original version) PCIe card cables are used to connect the
internal PCIe card, the primary HBA and a riser-mounted PCIe card, and the secondary HBA to
the motherboard. See the following sections for instructions.
The PCIe card cables are FRUs and can only be replaced by an Oracle-qualified service
technician.
■
118
“Remove PCIe Card Cables From Primary HBA PCIe Card” on page 119
Oracle Database Appliance Service Manual • April 2014