Download ES47 Upgrade Guide - iStorage Networks
Transcript
4.6 Troubleshooting During Console Power-up If your server management keeps looping on trying to form the group, then you need to check your NAT box carrier lights for port connections. Next check all drawers within the cabinet (I/O and 2P drawers) to be certain they have unique identifiers. Issuing the Set Membership command should stop the broadcast message and enable server management to create a new group ID. If your system keeps looping, your drawers may have faulty connections to the system NAT box. Each SM LAN connection should show two active LEDs. If looping persists, check the ID numbers on the OCP of each drawer. Every drawer within any cabinet must have a unique ID. Your 2P drawers should have Ids 0, 1, 2, and 3, respectively, working from bottom to top. Configure and Troubleshoot 4-11