Download Quick Start User Manual

Installation
RSA6100A Series Options
You can add the following options to your analyzer:
Option 01 - Adds 10 MHz to 3 GHz Pre-Amplifier
Option 02 - Adds frequency mask triggering and RAM expansion
Option 05 - Adds digital IQ output and 500 MHz analog IF output
Option 06 - Adds a removable hard disk drive (not compatible with Option 07 or Option 08)
Option 07 - Adds a DVD±RW drive, no-cost option (not compatible with Option 06 or Option 08)
Option 08 - Adds a removable solid-state hard drive (not compatible with Option 06 or Option 07)
Option 11 - Adds Phase Noise and Jitter Measurement
Option 12 - Adds Settling Time Measurement (Frequency and Phase)
Option 20 - Adds advanced signal analysis (including pulse measurements)
Option 21 - Adds general-purpose digital modulation analysis
Option 110 - Adds 110 MHz real-time capture bandwidth
Option 200 - Advanced DPX and Triggers
RSA56KR – Rackmount for RSA5100A Series and RSA6100A Series analyzers
RSA6100A Series & RSA5100A Series Quick Start User Manual
5