1
Download Voice Processing Solutions Installation and Service Manual
Transcript
GP 504 Page 4 of 8 Release 5.03 and later Reference Change/Show Non-Displayable Class of Service 1 RC 212 H O F K A s s W H --- R E CD EI ID --- AP DH MO I N N E --- Y N Y RC211 S T A A C T C I E 0 s N S --Y Change/Show Displayable Class of Service 1 A T C OC LE LS s --- 0 N M E R s --- Y Y M EN RE ST --- Use RC 218 to assign a directory number for the Enhanced In-band trunk group. This DN is the destination for all forwarded calls. If your system has the Receptionist II application, it is also the termination point for incoming trunk calls. DIR NUM TYPE IDENTIFIER VMS Where Note: A is the directory number is number of mailbox digits is the Enhanced In-band Trunk Group number You do not need to program a hunt group for calls to reach the system. The number of the trunk group in the IDENTIFIER associates this DN with trunks that you marked as VMS trunks in step 6.
