Download Voice Processing Solutions Installation and Service Manual

GP 504
Page 5 of 8
Release 5.03 and later
Reference
Step
8.
Use RC 113 to create a “dummy” extension, and then forward that extension to the
DN for the Enhanced In-band trunk group with RC
This extension is the
number that users must dial to retrieve their messages. You should select an
remember number for this extension.
DIR
D
YY
Where
DIV
DIV
DST
DA
VM
N
zz
DIV
ID
XXX is the DN for message retrieval from step 7
is the Basic Class of Service
Configure Message Waiting Trunk
9.
Use the following RC transactions to add the message waiting trunk group. The
trunk group probably only contains one trunk.
RC 161
Add/Change Trunk Group Characteristics
TRUNK SIGNALLING
----OUT---PAD
N
RTN
DIAL ALT
GRP T R U N K D S P D S P T R K S G N L D I A L S G N L T O N E T R K 2 3- AGENT
NO.
APPL.
COS COS DIR TYPE TONE TYPE RTND GRP WAY WAY GROUP
--- ------- --- --- --- ---- ---- ------ ---- --- --- --- -----XXX
TIE
ZZ
IN
TC
DT
-N
03
4
DO YOU WANT DTMF SIGNALS BLOCKED? Y/N
Where
RC 169
XXX is the trunk group number
YY is the displayable COS
ZZ is the non-displayable COS
Add/Change Trunk Group Characteristics
VMS
TRUNK
----Y
A