1
Download 3 - Jegs
Transcript
FIGURE 222 FIGURE 223 32. Install the included 4” silicone coupler (P/N 21790-4) onto the throttle body. Secure using the factory hose clamp from the stock intake. Place a #72 hose clamp (P/N 31167) on the round end of the coupler. SEE FIGURE 224 & 225 FIGURE 224 FIGURE 225 33. Install the factory MAF meter into cast intake pip (P/N 21780S) and secure the sensor to the tube using the factory screws. SEE FIGURE 226 FIGURE 226 60164revC Page 69 of 75
