Download Safety Precautions

Using The Scan Tool
Print Data
The Print Data function allows the printing of diagnostic information
stored in the Scan Tool.
3
✓
✓
The Scan Tool’s internal battery power can be used to print data.
✓
Make sure you have previously installed the PC software in Using the
CD.
✓
✓
Launch Scanning Suite and then start printing application.
Print Data is available from both the Main Menu and OBD II Function
List.
Follow all instructions on PC.
1. Select Print Data from the
OBD II Function List.
•Use UP or
DOWN arrow
key until Print Data is
highlighted.
•Press
ENTER.
✓
OBD II Function List
=====================
Record Data
Vehicle Information
Modules Present
Review Data
Print Data
Code Lookup
System Setup
When printing playback data, Start Frame and End Frame need to be
defined.
2.Select Data To Be Printed.
DOWN arrow
•Use UP or
key.
•Press
ENTER.
PRINT MENU
=====================
I/M Readiness
Codes
Pending Codes
State OBD Check
Review Fre eze Data
O2 Monitor Tests
3 – 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •