Download Sun Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide

Targets, Properties, and Values
The following targets, properties, and values are valid for ILOM serial port settings.
TABLE 4-3
Valid Targets, Properties, and Values for ILOM Serial Port Settings
Target
Property
Value
Default
/SP/serial/external
commitpending
flowcontrol
pendingspeed
true|(none)
software
<integer>
(none)
software
9600
speed
Read-only value;
configured via the
pendingspeed
property
commitpending
pendingspeed
true|(none)
<integer>
speed
Read-only value;
configured via the
pendingspeed
property
/SP/serial/host
(none)
(none)
▼ Enable HTTP or HTTPS Web Access
ILOM supports both HTTP and HTTPS connections. ILOM enables you to
automatically redirect HTTP access to HTTPS. ILOM also enables you to set the
HTTP and HTTPS ports.
Before You Begin
■
To modify HTTP or HTTPS access, you need the Admin (a) role enabled.
Follow these steps to modify web access:
1. Log in to the ILOM CLI.
2. At the command prompt, type:
-> set /SP/services/http [propertyname=value]
The properties are located in /SP/services/http and /SP/services/https.
Chapter 4
Configuring ILOM Communication Settings
31