Download Form #4565

HELPFUL HINTS
1. BEFORE STARTING INSTALLATION:
Familiarize yourself with the
Installation Instructions and
GlobalCruise components.
2. MATING CONNECTORS:
A. When disconnecting, hold
connector and press the lock
downward while pulling
connectors apart. Figure A
CAUTION
Do not pull on wires.
B. When inserting, push mating
connectors together until locking
mechanisms are firmly locked
together. Figure B
3. AIRBAG AND ANTI-THEFT RADIO:
A. If vehicle is equipped with an
Anti-Theft Radio, the radio code
must be written down prior to
disconnecting battery cable. The
code must be reentered when the
negative battery cable is reinstalled.
Figure A
Figure B
B. If vehicle is equipped with an
airbag (SRS), it is advisable to
disconnect the negative battery
cable. However, remember that
some vehicles retain power to the
airbag system when battery is
disconnected.
4. REMOVAL OF NEGATIVE BATTERY
CABLE:
Disconnect the negative battery cable
before installing the GlobalCruise for
safety precautions. Remember to
reconnect the cable after installation.
Figure C
5. ACCESSORY POWER:
When installing the special
terminal into the fuse panel of
vehicle, See Figure D.
WARNING
Failure to follow the instruction manual
could not only cause the GlobalCruise to
work improperly, but could cause the throttle to hang up, possibly causing damage to
your vehicle and injury and/or death to
you and your passengers.
Page 4
Figure C
Figure D