Download Maintenance Procedures

Logic Module
MAINTENANCE PROCEDURES: GAME KING PLUS
19" UPRIGHT
a. Remove the mounting screws that fasten the board to the metal
standoffs on the tray.
b. Lift the board up and away from the tray.
Installation
1. To install a circuit board onto an I/O assembly tray:
a. Rest the board on the mounting standoffs.
b. Attach the board to the tray with mounting screws.
2. Slide the I/O assembly tray into the I/O mounting bracket,
ensuring that it seats firmly into the connector.
12.5.2 Machine Enclosure I/O Tray
Removal
To remove the machine enclosure I/O tray from the bracket, see Figure
12-5 and proceed as follows.
I/O BRACKET
COVER
MACHINE ENCLOSURE
I/O TRAY
I/O MOUNTING
BRACKET
000334-080101
Figure 12-5. Machine Enclosure I/O Tray Removal
1. Open the machine door, turn the machine power off.
2. Disconnect the machine main power cord from the line filter on the
AC power distribution module.
3. Grasp the handle on the I/O assembly tray and slide the the tray
out of the I/O mounting bracket.
12-12
October 1, 2001