1
Download Service Manual - Agilent Technologies
Transcript
EXTERNAL TESTS (:DIAG:TEST 17) WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW Selects the rst external test 17: FRONT PANEL DIAG. ADJUSTMENT TESTS (:DIAG:TEST 41) WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW Selects the rst adjustment test 41: DC OFFST/HLD STEP ADJ. DISPLAY TESTS (:DIAG:TEST 48) WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW Selects the rst display test 48: TEST PATTERN 1. ALL EXT TESTS (:DIAG:TEST 53) WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW Selects the rst ALL EXT test 53: ALL EXT 1. MISC TESTS (:DIAG:TEST 58) WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW Selects the rst MISC tests 58: IMPEDANCE TEST KIT. Note After executing a test by pressing EXECUTE TEST , an annotation (Svc) is displayed to indicate any tests executed and the analyzer settings changed to the test settings. To return the analyzer to normal operation, cycle the analyzer power (o then on), or press 4PRESET5. Note While any test is being executed, do not change the analyzer setting using the front-panel keys, the GPIB, or the I-BASIC program . If the setting is changed during test execution, the test result and the analyzer operation are undened. NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN Test Status When selecting a test, the test status abbreviation is displayed as shown in Figure 10-4. Figure 10-4. Test Status on the Display Service Key Menus 10-5
