Download Triton 9700 Error Codes
Transcript
SECTION 7 - TROUBLESHOOTING ERROR/STATUS CODE: 132 DEFINITION: Status reports bad double detect in last dispense. RECOMMENDED ACTION: Open the Security Cabinet and inspect the feed path for jammed notes and other foreign matter in the Double Detect Assembly. Purge the dispenser using purge command. Reset the Cash Dispenser by turning OFF the AC power switch for a few seconds and switching it back ON. Complete a test dispense. If the problem persists, replace the Dispensing Mechanism. ERROR/STATUS CODE: 133 DEFINITION: +5 VDC not present on carrier detect. RECOMMENDED ACTION: See the recommended action for Error Code 128. ERROR/STATUS CODE: 134 DEFINITION: Exit blocked as reported by status check. RECOMMENDED ACTION: Open the Security Cabinet and inspect the feed path and exit sensor for jams and broken components. If the feed path is clear Purge the dispenser with the Purge command. Reset the Cash Dispenser by turning OFF the AC power for a few seconds the turning it back on. Verify correct operation with live transactions. It the problem persists replace the Dispensing Mechanism. PRELIMINARY 7-25