Download SIMNRA User's Guide

Transcript
Helium
If Andersen-Ziegler stopping is selected then for incident 3 He and 4 He ions the electronic
stopping power data by Ziegler [2] are used for all elements. The electronic stopping power
Se in eV/(1015 atoms/cm2 ) for incident 4 He ions with energy E in keV is given by
1
1
1
=
+
Se
SLow
SHigh
(4.27)
SLow = A1 E A2
(4.28)
with
and
SHigh
A3
A4
=
ln 1 +
+ A5 E
E
E
(4.29)
A1 −A5 are fitting coefficients and tabulated in [2]. They are stored in the file STOPHE.DAT.
Equations 4.27–4.29 are valid for 1 keV ≤ E < 10 MeV. 4 He-stopping at higher energies
(above 10 MeV) is not implemented in the program.
The stopping power of 3 He is identical to the stopping power of 4 He at the same
velocity [2]. The stopping power of 3 He with energy E is obtained by taking the stopping
power value at the energy E(4 He) = 4/3 E(3 He). The stopping power for 3 He is valid in
the energy range 10 keV ≤ E < 7.5 MeV.
Nuclear stopping for incident helium ions is calculated with the Krypton-Carbon (KrC) potential [26]. The nuclear stopping Sn in eV/1015 atoms/cm2 for He-ions with incident
energy E (in keV) is given by:
8.462 Z1 Z2 M1
Sn = sn
2/3
(M1 + M2 ) Z1
2/3 1/2
(4.30)
+ Z2
sn is the reduced nuclear stopping and Z1 , M1 are the nuclear charge and mass of the
helium ion and Z2 , M2 are the nuclear charge and mass of the target element. The reduced
nuclear stopping sn has the simple form
sn = 0.5
ln(1 + )
+ 0.10718 0.37544
(4.31)
is the reduced energy and is given by
=
32.53 M2 E
Z1 Z2 (M1 + M2 )
2/3
Z1
+
2/3 1/2
Z2
(4.32)
Nuclear stopping is only important at incident energies E < 100 keV, at higher energies
nuclear stopping becomes negligible.
62