Download Quad E1 Voice Processor User Manual

Quad E1 Voice Processor User Manual
Monitoring and EXi Capabilities
9.3.2 STATCS Command
The STATCS command displays the current settings for the call statistics and Echo
Advisor parameters (refer to section 9.3.1, “SETCS Command,” on page 115 for
parameter definitions). The STATCS command syntax is as follows:
STATCS [CODEC|FER|DLY|HEC|AEC|ECAD|SPEECH|NOISE|SNR|DUR|EOR|IEBPL]
The STATCS command can be issued with any of the arguments shown above to
display only details relating to the argument.
Note Hybrid echo statistics and Echo Advisor statistics are not supported in feature
package 10. Therefore, parameters for the HEC and ECAD arguments are not
displayed if feature package 10 is currently active.
The STATCS command with no arguments is displayed in the following example.
Uplink CODEC TYPE - [G.711],GSM-FR,GSM-HR,GSM-EFR,AMR-12.2 ,AMR-10.2,
AMR-7.95,AMR-7.4,AMR-6.7,AMR-5.9,AMR-5.15,AMR-4.75,EVRC,CUST-1,CUST-2
Downlink CODEC TYPE - [G.711],GSM-FR,GSM-HR,GSM-EFR,AMR-12.2 ,AMR-10.2,
AMR-7.95,AMR-7.4,AMR-6.7,AMR-5.9,AMR-5.15,AMR-4.75,EVRC,CUST-1,CUST-2
Uplink Delay (10-500; default 100 ms) - [100]
Downlink Delay (10-500; default 100 ms) - [100]
Uplink FER (%) - [0],0.5,1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5
Downlink FER (%) - [0],0.5,1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5
AEC DELAY RANGE-1 (40-40; default 40 ms) - [40]
AEC DELAY RANGE-2 (60-320; default 140 ms) - [140]
AEC DELAY RANGE-3 (80-340; default 180 ms) - [180]
AEC DELAY RANGE-4 (100-360; default 240 ms) - [240]
AEC DELAY RANGE-5 (120-380; default 360 ms) - [360]
SPEECH LVL RANGE-1 (-1 to -38; default -10 dBm) - [-10]
SPEECH LVL RANGE-2 (-2 to -39; default -20 dBm) - [-20]
SPEECH LVL RANGE-3 (-3 to -40; default -30 dBm) - [-30]
NOISE LVL RANGE-1 (-1 to -43; default -20 dBm) - [-20]
NOISE LVL RANGE-2 (-2 to -44; default -30 dBm) - [-30]
NOISE LVL RANGE-3 (-3 to -45; default -40 dBm) - [-40]
SNR RANGE-1 (1-38; default 10 dB) - [10]
9
SNR RANGE-2 (2-39; default 20 dB) - [20]
Monitoring and
EXi Capabilities
SNR RANGE-3 (3-40; default 30 dB) - [30]
CALL DURATION RANGE-1 (5-60; default 6 sec) - [20]
CALL DURATION RANGE-2 (10-300; default 60 sec) - [60]
CALL DURATION RANGE-3 (1-60; default 5 min) - [5]
CALL DURATION RANGE-4 (2-120; default 30 min) - [30]
EOR OFFSET (0-120; default 5 ms) - [5]
EOR1 OFFSET (0-500; default 25 ms) - [25]
EOR2 OFFSET (0-500; default 105 ms) - [105]
IE FACTOR FOR CUST-1 (0-50; default 0 ) - [0]
BPL FACTOR FOR CUST-1 (10-50; default 10 ) - [10]
IE FACTOR FOR CUST-2 (0-50; default 0 ) - [0]
BPL FACTOR FOR CUST-2 (10-50; default 10 ) - [10]
250-0300-20, Version G3
DITECH NETWORKS
www.ditechnetworks.com
123