Download DK Design Suite user guide

Transcript
DK Design Suite user guide
3.4.1 Project settings
Project settings define how your files and projects are compiled and built. Select
Project>Settings to see the Project Settings dialog box. The different settings are available via
tabs. The tabs available will depend on the project type. For example, the Library tab is
only available for a library-type project.
The tabs available are:
•
General
•
Preprocessor
•
Debug
•
Synthesis
•
Optimizations
•
Chip
•
Linker
•
Build commands
•
Library
If you can’t see the tab you want, then scroll the tabs by clicking on the arrows at the
end of the tabs. Some tabs may only be visible if you have selected a Handel-C file in the
left window.
The tabs in Project Settings have changed. There is a new Synthesis tab and the Compiler
tab has been removed. The Debugger tab is now called the Debug tab. Some of the options
are now on different tabs.
3.5 Build menu
Command
Shortcut
Function
Compile
Ctrl+F7
Run the compiler on the active document
(which must be a Handel-C code file), to
generate its .hco file.
Build project
F7
Build this project: run the compiler on all
.hcc files that are newer than their object
(.hco) files, then run the linker on the
object files to make the .dll, .hcl, EDIF,
Verilog or VHDL files. (EDIF, VHDL and
Verilog are not available in Nexus PDK.)
Stop Build
Ctrl+Break
Cancel a build in progress.
www.celoxica.com
Page 33