Download MONITOR ISM™ Director V4.3 User's Guide

Software Activation and Licensing
Software "Activation Key"
System capacities and types of expansion / application modules supported depends on your
software licensing, which is managed through a small 'activation key'.
Activation Key: The MONITOR ISM Director software uses a small 'activation key' to
manage software licensing and optional features. This device must be plugged onto the
PC that contains the software database (≥V4: USB connector; ≤V3.3.2: Parallel/printer
port; V3.3.3: Either).
Note: Director software ≥V4 will not start up if the USB key is missing.
Your software (activation key) comes pre-enabled to operate for 90 days with
standard features.
For additional features, client-server operation, or extended duration, you must run
the license-manager program.
Activating Your Software
The Director USB Security Key or “HASP” must be registered or the Director Program will stop
operating!
Note: License validations cannot be done over the phone.
Dealer Code and Password
Before you begin, you will need a Dealer code and password that must be entered in the
Licensing Manager’s Registration Information.
The Dealer code and password can be obtained from VEREX Technology by calling +1
905.206.8436.
Please perform the following procedures to obtain a new validation key number and register
the security key.
• After the Director program has been
installed, run the version 4 License
Manager program
(Director Server PC if client-server):
[Start] Î Programs Î Monitor
Director Î Monitor Director –
License Manager.
• The “Information” screen will open
supplying a list of system features
that are enabled or not enabled that
were included with the system.
The “Registration” screen will display. Enter
286
MONITOR ISM™ Director V4.3 User's Guide
21-0381 v4.3