Download MATWorX Studio User Guide

Transcript
Getting Started
4-11
Figure 4-12 PBX Login Dialog (Client/Server Configuration)
Step 5
Double-click the name of the server to which you want to connect. A list
of available PBX Sites and PBX Names appears in the appropriate
dialog fields.
Step 6
Select your PBX site from the drop-down menu, if necessary. A list of
connected PBXs displays in the PBX Name window.
Step 7
Select the PBX to which you want to connect from the list of PBX names.
Step 8
Click the Connect button
process.
. This launches the connection
You have now successfully connected MATWorX Studio to the PBX.
Troubleshooting a Failed Connection (All Types)
The following list provides possible reasons for a failed connection
between your computer and the PBX, as well as the action required to
correct the problem.
• Have you created a hardware link between your PC and the PBX?
— Yes - Go to the next bullet item.
— No - MATWorX Studio will not operate properly until the hardware
link is made. Linking your PC to the PBX is an important part of the
PBX installation. This differs from configuring the communication
settings between your PC and the PBX (using the Device
Configuration.) Please read your PBX’s Operation Guide for
complete instructions on setting up the hardware link.
MATWorX Studio User Guide - Revision 3