Download Revised Troubleshooting Handbook
Transcript
4 Blinks Error Code If the power LED continues to blink even after the TV is unplugged, press and hold the power switch on the TV for a few seconds until the LED turns off. Trouble Mode Defective Board Power Supply SOS Primarily P board or possible A board TC-P42G10 TC-P46G10 TC-50G10 Warning: Disconnect AC Power prior to making any disconnection or connection. TC-P54G10 All other 2009 Models Start Here Disconnect the TV. Disconnect P2 and P11 on the P board Measure the resistance between pin 1 of connector SS11 on the SS board and ground (Chassis). Yes Is there a short to ground? No Yes Start Here Does the power supply makes a “chirp” noise at plug in? No Measure the resistance between pin 1 of connector SC2 on the SC board and ground (Chassis). Replace the SS board Turn the TV on Yes Yes Replace the SC board Is there a short to ground? No P Board Is pin 12 of CN P25 on the P board high before the TV shuts down? No A Board Replace the P board Slide #36