Download USER MANUAL - Handi Quilter
Transcript
3. Carefully lift the quilting machine and place it on the carriage so the wheels engage the white carriage tracks, making sure not to set the wheels on top of the stitch regulator cable (this is easier to do with two people – one at each end of the quilting machine). 4. With one end of the stitch-regulator cable plugged into the machine’s C-Pod and the middle connector plugged into the quilting machine’s “Y” encoder, plug the other end of the cable into the carriage “X” encoder (Figure 3.16). Stitch regulator cable Figure 3.16 www.HandiQuilter.com/ProStitcher 01/07/13 Installation Instructions 3.9