Download hydraulic.

Installing the 1756-HYD02 Module
Assembling The Removable
Terminal Block and the
Housing
2-11
Removable housing covers the wired RTB to protect wiring
connections when the RTB is seated on the module.
1. Align the grooves at the bottom of each side of the housing with
the side edges of the RTB.
Figure 2.14
Housing
Groove
Side edge of RTB
Groove
Strain relief area
Side edge of RTB
RTB
20858-M
2. Slide the RTB into the housing until it snaps into place.
IMPORTANT
If additional wire routing space is required for your
application, use extended-depth housing 1756-TBE.
Publication 1756-UM525A-EN-P - June 2003