Download USER GUIDE - Acandia AB

Transcript
IE-SNC-T5(6)5xx-04
Factory defaults
Factory defaults field set the device into factory configuration. Network parameters (IP
address, Subnet mask, Gateway, DNS) are left without changes. Settings relating to
measurement are not restored by factory defaults.
Network parameters are changed while you close jumper and push button inside device
during connecting power supply. Factory parameters settings:
Parameter
Default value
SMTP server address
SMTP server port
Alarm email repeat sending interval
Info email repeat sending interval
Alarm and Into emails attachment
E-mail recipients addresses
E-mail sender
SMTP authentication
SMTP user/SMTP password
E-mail sending enabled
IP addresses SNMP traps recipients
Password for SNMP reading
Sending SNMP Trap
Website refresh interval [sec]
Website enabled
Website port
Security
Administrator password
User password
Modbus port
Modbus server enabled
History storage interval [sec]
SOAP server IP address
SOAP server port
SOAP server target place
example.com
25
off
off
off
cleared
sensor@IP
off
cleared
off
0.0.0.0
public
off
10
yes
80
off
cleared
cleared
502
yes
60
0.0.0.0
80
cleared
19