Download USER GUIDE - Acandia AB
Transcript
IE-SNC-T5(6)5xx-04 Factory defaults Factory defaults field set the device into factory configuration. Network parameters (IP address, Subnet mask, Gateway, DNS) are left without changes. Settings relating to measurement are not restored by factory defaults. Network parameters are changed while you close jumper and push button inside device during connecting power supply. Factory parameters settings: Parameter Default value SMTP server address SMTP server port Alarm email repeat sending interval Info email repeat sending interval Alarm and Into emails attachment E-mail recipients addresses E-mail sender SMTP authentication SMTP user/SMTP password E-mail sending enabled IP addresses SNMP traps recipients Password for SNMP reading Sending SNMP Trap Website refresh interval [sec] Website enabled Website port Security Administrator password User password Modbus port Modbus server enabled History storage interval [sec] SOAP server IP address SOAP server port SOAP server target place example.com 25 off off off cleared sensor@IP off cleared off 0.0.0.0 public off 10 yes 80 off cleared cleared 502 yes 60 0.0.0.0 80 cleared 19