Download Operating Instructions

Using SD/SDHC Memory Cards
This unit supports SD/SDHC memory cards.
◆ NOTE:
• Current SETUP menu settings can be saved to and loaded from an
SD memory card. For details, refer to page 140.
USED:
Used capacity (bytes)
BLANK:
Free space (bytes)
TOTAL:
Total capacity (bytes)
NUMBER OF CLIPS:
The number of clips on an SD
memory card when clips have
been copied to an SD memory
Displaying Miscellaneous SD
Memory Card Information
card using a proxy or a P2
PROTECT:
Use the following procedure to display SD memory card
status on screen for checking.
Write protected
• This unit cannot record proxies.
4 Press the SET button and the MENU button to end
1 Open the thumbnail screen.
processing.
2 Press the MENU button.
Formatting SD Memory Cards
3 Use the cursor buttons to choose [PROPERTY] –
[DEVICE] – [SD CARD] and press the SET button.
Use the following procedure to format an SD memory card
inserted in an SD memory card slot.
1 Open the thumbnail screen.
2 Press the MENU button.
3 Use the cursor buttons to select [OPERATION] –
Using USB Connectors and SD/SDHC Memory Cards
camera recorder.
[FORMAT] – [SD CARD].
The following information may also appear depending on
card status.
4 Select [YES] and press the SET button.
The card is now formatted.
SD STANDARD:
Indicates that an SD memory
card is formatted according to
◆ NOTE:
the SD/SDHC standard.
• To cancel formatting, select [NO] and press the SET button.
SUPPORTED: Complies with SD/
SDHC
NOT SUPPORTED: Does not
5 Press the SET button (check) when the completion
message appears.
comply with SD/SDHC
Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards
111