Download User Manual Reference/Professional Temperature

RTC-250 A/B/C
RTC-158 A/B/C
For recommended
50 cSt oil
0°C - 50°C
50°C - 100°C
100°C - 150°C
150°C - 200°C
200°C - 250°C
For recommended
10 cSt oil
100%
95%
90%
85%
80%
-20°C - 50°C
50°C - 100°C
100°C - 120°C
120°C - 155°C
100%
95%
90%
85%
Warning





Do not handle hot fluid.
Do not pour cold fluid into a hot well – it might cause an
explosion
Do not pour water or any other fluids into a bath filled
with hot oil, because only a few drops of water might
cause a steam explosion, if poured into e.g. 250°C hot
oil.
If the fluid is heated beyond the flash point, it may
constitute a fire hazard.
AMETEK Denmark A/S does not take any responsibility,
if the well is filled with other fluids than those
recommended.
If the fluid has caught fire, switch off the main power to prevent further
heating of the fluid. Flames are best extinguished by cowering the well
with a non-flammable lid.
Caution…


20
Be careful not to overfill the well with oil.
The oil level rises several centimetres when the
temperature is rising to maximum. To stop the overflow
switch off the main power and the oil level will decent.
Do not attempt to remove hot fluid with the liquid drainage
syringe, as it might melt.
2011-10-25
128206
00